METTLER TOLEDOMX5-S and UMX2-S automated Microbalances for Cylindrical Weighing SamplesSupplement to the operating instructions for MX and UMX balance
Loading mechanism of the weighing cell 103.3 Controlling the loading mechanism using MT-SICS commandsThe “WS” MT-SICS command can be used to directly
Loading mechanism of the weighing cell11Program example:Send K 1 (K 1<CRLF>)Answer: e.g. K A<CRLF>Send DW (DW<CRLF>)Answer: e.g. D
Loading mechanism of the weighing cell 12Send K 1 (K 1<CRLF>)Answer: e.g. K A<CRLF>Send DW (DW<CRLF>)Answer: e.g. DW A<CRLF>Se
Loading mechanism of the weighing cell13Send K 1 (K 1<CRLF>)Answer: e.g. K A<CRLF>Send DW (DW<CRLF>)Answer: e.g. DW A<CRLF>S
Cleaning and maintenance 144 Cleaning and maintenanceYour MX2/UMX5 automated balance does not require laborious maintenance. For correct operation an
Technical data and accessories155 Technical data and accessoriesIn general the technical data for MX5/UMX2 automated balances and the available acc
Technical data and accessories 165.3 Dimensional drawingsControl unit (all dimensions in mm)OnOffO/TMETTLER TOLEDO224 60127.5 150210155.5365.530162
Technical data and accessories17226.5 73232225.52235245 286.5812935613101311471071008813253294.5MX5-S/UMX2-S weighing cell (all dimensions in mm)
Overview of MX5-S automated and UMX2-S automated1 Control unit (for details see operating instructions for AX and MX/UMX balances)2 Metal protective c
© Mettler-Toledo AG 2007 11781130 Printed in Switzerland 0708/31.12Mettler-Toledo AG, Laboratory & Weighing Technologies, CH-8606 Greifen
Contents3Contents1 Introduction ...
Introduction 41 IntroductionThank you for choosing the MX5-S automated balance or the UMX2-S automated balance from METTLER TOLEDO. These balances en
Unpacking and setting up the balance52 Unpacking and setting up the balanceThis chapter provides information about unpacking and setting up your ba
Unpacking and setting up the balance 6Positioning plate of the weighing cell in the desired location and secure (with screws or by gluing). The foot o
Unpacking and setting up the balance7Make sure that the weighing chamber cover (F) is closed, then place the protective cover (G) over the weighing
Unpacking and setting up the balance 8Insert the electrodes as far as they will go into the fastening strip (D) and tighten the two screws (E).Place t
Loading mechanism of the weighing cell93 Loading mechanism of the weighing cellThe loading mechanism of the weighing cell for your MX5-S/UMX2-S aut
Comments to this Manuals